This is the favored barrel for those hunting hogs at night with a thermal device and suppressor.

If you are looking for a factory loaded AR  cartridge to hunt yotes, deer and hogs the 6.8 can't be beat in terminal performance. The exterior ballistics of the 6.8 and Grendel are within a few inches of each other all the way to 400yds. The 6.8 starts off 80-100fps faster with the same weight bullet and barrel length. The 6.8 has a great selection of usable hunting bullets. A 5.56 and a 6.8 could handle every possible need.

Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads. The throat/freebore is designed to be more accurate with a wider range of bullets than the typical SPCII chamber.

• Chamber: 6.8ARP(similar to Wylde) accurized chamber
• Profile: SCOUT lightweight- tapers.750-700 under the guard/.750 gas block/.700 out front
• Fluted: No
• Barrel Length: 12.5"
• Twist Rate: 1:11.25- Hybrid 3R rifling
• Gas System: mid Length
• Diameter at Gas Port: .750"
• Muzzle Thread Pitch: 5/8x24
• Material: 4150 Chrome Moly Vanadium Steel
• Finish: Melonite
• Process: Button Rifled
• Barrel Lining: Melonite
• Barrel Extension: M4
• Assembly: Stripped
• Weight: 1lb-7oz

.

For use on pistols or NFA registered SBR lowers only. All NFA rules apply, be careful of changes.

This is the favored barrel for those hunting hogs at night with a thermal device and suppressor.

If you are looking for a factory loaded AR  cartridge to hunt yotes, deer and hogs the 6.8 can't be beat in terminal performance. The exterior ballistics of the 6.8 and Grendel are within a few inches of each other all the way to 400yds. The 6.8 starts off 80-100fps faster with the same weight bullet and barrel length. The 6.8 has a great selection of usable hunting bullets. A 5.56 and a 6.8 could handle every possible need.

Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads. The throat/freebore is designed to be more accurate with a wider range of bullets than the typical SPCII chamber.
DO NOT USE bullets that measure over .277" in these 6.8 barrels they will cause excessive pressure

If applying for an SBR use 13" as barrel length when filling out form.

• Chamber: 6.8ARP(similar to Wylde) accurized chamber
• Profile: SCOUT lightweight- tapers.750-700 under the guard/.750 gas block/.700 out front
• Fluted: No
• Barrel Length: 12.5"
• Twist Rate: 1:11.25- Hybrid 3R rifling
• Gas System: mid Length
• Diameter at Gas Port: .750"
• Muzzle Thread Pitch: 5/8x24
• Material: Stainless
• Finish: sanded stainless
• Process: Button Rifled
• Barrel Extension: M4
• Assembly: Stripped
• Weight: 1lb-7oz

.

For use on pistols or NFA registered SBR lowers only. All NFA rules apply, be careful of changes.