Skip to main content

SVF(flash)5.56-6mm 1/2-28 thread
Reg. Price:
Sale Price:
Items Remaining:5

This flash hider is small diameter (.740) apx the same as a barrel diameter and very lightweight.  A very effective closed end flash hider that will not snag on branches etc.  Filmed from 2 ft in the dark side by side with the AAC Blackout and Smith Vortex, they reduced flash to a minimum glow where some devices and target crowned barrels produced a 10" ball of flame. None of the 4 flash hiders increased the noise to the shooter.
This flash does not need to be clocked and does not need a crush washer. If you want to clock the device you will need a crush washer.

For use with our 223 wylde barrels with 1/2-28 thread.

add to cart

    DO NOT USE  bullets that are larger than .277" in these 6.8 barrels, 99.9% of all .270/6.8 bullets made are .277" diameter.  The chambers were designed for .277" bullets and all 6.8 barrels have a .277" bore so bullets larger than .277" will cause excess pressure and increased copper fouling.  It seems some Cavity Back bullets are .278" and on top of that they are solid copper so check the diameter of the bullets before using them.


     AR Performance (ARP)

    Hi performance 5.56 & 6.8 SPC barrels and parts since 2007

    The best way to contact is by email

    Phone: 786-782-8209  8am-5pm eastern time  M- Fri only
    Sorry we do not export anything and do not have a storefront. Everything must be purchased online.

    Create your own website