#
AR PERFORMANCE

    All Wildcat cartridges are now on this page.

    General info first- Open 9-5 EST if you need to call. "tech@ar15performance.com" is the best email.  A limited amount of product is added to the site daily to keep wait times down. Still with the amount of orders we receive in a single night it keeps us busy and usually run 3-7 business days to ship depending on the parts ordered.  FEDEX will send an automated email with tracking info when the label is printed.

    SHIPPING
    Due to numerous shipping, fraud and theft problems over the last 9 years. We have a very strict ordering and shipping policy. We can ship by FEDEX or USPS to residence, business or post offices but the shipping address must match the billing address associated with the credit card used to place the order. We will no longer ship to apartments complexes. We are not taking any new customers in California.    You 68forums guys know what to do.
    All parts will require a signature upon delivery, Fed Ex or USPS for PO boxes

    Caliber choice opinion- If your primary use will be long range targets the 224 Valkyrie, TAC 6, 224 and
    6mm Predator and 6.5 Grendel makes sense. There are more match type bullets available in 224, 6mm and 6.5mm than the 6.8.  The 6mm Predator, 240 Valkyrie and TAC 6 will beat all others in exterior ballistic performance. The 6mms in my opinion are also the most versatile as light as 55gr for varmints to 80-90gr for hunting and 95-108gr VLDs for long range paper punching. 
      If you are looking for a deer or hog round the 27ARP, TAC 30(30 Herrett), 6.8, 6.5 Grendel, SIX5 and 7.62x39 will be better choices for hunting.


    BOLTS ARE NOT INCLUDED with a barrel. They are an option either below the barrel description or on the 'bolt/carrier"page. No other parts are included with a barrel unless added as an option.

    Headspace- When bolts and barrels are purchased together we will check the headspace.

    Barrels are ported to work with standard carbine springs and buffers when used with Normal ammo producing 50000psi. Using weak ammo or reloads, heavier buffers or stronger spring may cause the rifle to short stroke or not strip ammo from the mag. We can port the barrels larger if you plan to run different parts or lower pressure ammo. Add a note in the additional comment box during checkout.

    The gas block boss on the barrels are sized to work with .750 diameter gas blocks, that does NOT mean the boss itself is exactly .750.

    Any of the 6.8 wildcats may use the 22 Nosler brass. Just use a 5.56/223 bolt and trim the brass to the trim length called out in the specs.

    Reg. Price:
    $249.00
    Sale Price:
    $200.00
    Save:
    $49.00
    Items Remaining:4

    224 Valkyrie Varmint---long freebore

    This particular batch of barrels like many chambered before June 2018 have a long freebore .096", that is .046" longer than the SAAMI spec chamber.  They will work best with 55-77gr bullets, 80 Berger and Nosler RDF bullets hand loaded. They shoot the factory loaded 60 Nosler and 75TMJ around 3/4-1".  Federal factory 90gr fusion shoots 2-3" at 100yds. Short nosed bullets will have to be loaded shorter than mag length to keep them out of the lands. Adjust your loads to keep the bullets out of the lands.

    All VLDs (90smk, 95 smk, all Hornady ELDs)will have to be loaded longer than mag length using cut out mags to get close to the lands for best accuracy.

    Ordering one of these barrels means you agree to purchase one knowing the specs and limitations of the long freebore.


      Results from these barrels will be better with handloads than factory Federal ammo. I have not been able to test Hornady ammo yet but from testing the bullets I think it will be more accurate than the Federal. I have no doubt of the ability of the barrels to shoot accurately with handloads. Some handloads are shown below, they were found with apx 3 hrs of testing.

    Starline brass, Russian primers -------------------------------------------
    55gr Nosler Bt-30gr CFE oal=2.220" under 3/4"------------------------------------
    -77TMK-25.3gr 8208 OAL 2.260 apx 3/4"
    -80 Bergers 2.295OAL  - 28 and 29gr SWM and 29.7gr CFE   1/4" at 100
    -75gr ELD-26gr SWM oal=2.290 under 3/4"------------------------------------------

    75eld, 80 eld, 88 eld, 90 and 95smk should shoot better when loaded longer than mag length
    -90gr SMK- 26.5gr RE17 oal 2.345 under 5/8",
    -90smk -26.5gr RE17 OAL 2.30" apx 3/4"
    -90smk-24.5gr SWM OAL 2.30" apx 3/4"
    -95smk -25.8 RE17 OAL 2.290 under 5/8"
    -95smk-24gr SWM OAL 2.290 apx 3/4"

     These 22" 3R barrels are as fast as many of the old 6 groove 24" barrels. 

    • Chamber: 224 Valkyrie Varmint(.096" freebore)
    • Bolt: .125 recess-
    • Profile: " Varmint"   Tapers .925-.825 under the guard /.750GB/.718 out front.  They have a rifle +2 gas system and will need a 14" rail to reach back of gas block.
    • Fluted: No
    • Barrel Length: 22"
    • Twist Rate: 1:6.5- Hybrid 3R rifling
    • Gas System: RIFLE +2" ...2" longer than rifle. Tubes avail from WOA.
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8x24
    • Material: 4150 Chrome Moly Vanadium Steel
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 3lb 3oz
    Reg. Price:
    $299.00
    Sale Price:
    $249.00
    Save:
    $50.00
    Items Remaining:5

    TAC 6 (240 Valkyrie improved)

    I designed this for guys who like using the 6.8 brass. It is faster than a 240 Valkyrie would be and uses stronger 6.8 brass.  It may not be quite as fast (25-50fps)as the 6mm Predator but should be more reliable with stronger bolts and brass and it should feed better than the Grendel cases.  This was my idea of a perfect tactical cartridge 0-600yds with ease.  It is capable of shooting super light bullets at small varmints, 75gr bullets at yotes, 95-108gr long range target bullets and 80-90gr hunting bullets at deer and hogs.  The Tac 6 with 105gr Bergers will hit around 2700fps out of an 18"barrel. The TAC 6 will beat the ballistics of the 224 Valkyrie, 240 Valkyrie and the 6.5 Grendel.  Hornady custom dies are available and needed to form the brass.   The first batch of barrels are 18" and have Helical flutes.

    • Chamber: TAC 6 -based on the 6.8 case. Requires trimming the brass to 1.570. You do not need to fire form.
    • Bolt: use standard 6.8 bolt
    • Profile:  SPR-.850/.750/.718
    • Fluted: YES- Helical flutes
    • Barrel Length: 18"
    • Twist Rate: 1:8- Hybrid 3R rifling(similar to 5R but 3 lands and grooves for higher performance)
    • Gas System: RIFLE Length
    • Diameter at Gas Port: .750" Note - Boss is short for use with 1" long gas blocks.
    • Muzle Thread Pitch: 5/8x24
    • Material: 4150 Chrome Moly Vanadium Steel
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 2lb 12oz
    Reg. Price:
    $299.00
    Sale Price:
    $195.00
    Save:
    $104.00
    Items Remaining:4

    We are down to the last 8-10 barrels. It could be a year before we have more in stock.

    6.8 based wildcat- 18" barrel

    If you are looking for the most reliable and best all out terminal performance on hogs and deer out to 300yds the TAC 30 is it.   The rounds hit like Thor's hammer...DRT, a perfect match for Texas hog hunters. The Cavity Back bullets 125gr MKZ open to .800" diameter, imagine the would channel! They are pushing the 125gr MKZ to 2790 out of an 18" barrel with 29.4gr of SW blackout. That is 200fps faster than a 20" Grendel and 500fps faster than a 300AAC.  The Herrett using SW BO powder is as fast out of an 18" barrel as the 30 Remington AR  was out of a 24" barrel. The TAC 30  is big brother to the TAC 6 cartridge. It is a wildcat that you must reload, form and trim cases but you do not need to fire-form.

    4150 CMV 30 Herrett mid wt profile, Hybrid 5R rifling 11.25 twist . 2lb-2oz
    M4 feed ramps, mid length gas system, .850 taper to.750 under the guard, .750 gas block dia. .700 dia from gas block to muzzle.  5/8-24 thread muzzle.

    30 Herrett  reloading dies are used with a 6.8 shell holder. Any 6.8 SPC, 224 Valkyrie or 22 Nosler brass may be used, Trim to 1.570-1.580" max case length. It is important to size the brass close to the chamber size. Set the dies up where they push the shoulder back just enough to chamber the brass. Hornady 30 Herrett dies seem to work best but again be careful not to push the shoulder back too far. The 30 Herrett was a wildcat many years ago and the older dies vary in size. You do not need to fireform or turn the necks on the brass. Just size, trim, load and shoot.
      The 30 Herrett in an AR can be loaded to higher pressures than the old TC pistols. With 125-130gr bullets Shooters World BO, 1680, 4198 and RE7 work well.

    Suggested maximum loads-16"barrel
    125gr Sierra prohunter loaded to 2.240-30.5gr 1680=2610fps CCI 450 primer
    125gr Nosler Ballistic tip loaded to 2.3"-30.5gr 1680=2680fps CCI 450primer

    130gr MK319  30gr AA1680 =2590fps -very accurate and a great hunting bullet
    110gr Barnes TSX loaded to 2.295, 31gr 1680=2678fps
    110gr Barnes TSX loaded to 2.295, 32gr 1680=2796fps

    All loads produced groups in the 3/4-1" range and should be good for hunting, 100-200fps faster than the 6.8.

    The Hornady 125SST was not as accurate as the bullets above.

    28.5gr 1680 behind a 125 TNT hit 2500fps out of a 16" barrel.
    29.5gr 1680 apx 2570fps with 125gr Speer TNT or Hornady SST loaded to 2.3" is a good load.
    30gr 1680=2594fps-54900psi
    30.5gr 1680 =2655- 57000psi-Should be considered max load , do not load hotter than this.

    150gr Nosler BT-27.5gr 1680=2366fps

    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    Bullfrog Rusthunter products are known to cause discoloration of Melonite surfaces.

    Reg. Price:
    $249.00
    Sale Price:
    $150.00
    Save:
    $99.00
    Items Remaining:10

    --Special offer, No discounts or coupons-$20 flat rate shipping

    The big 750XD bolt is an option with the 6.5 Grendel barrels.
    Barrels ported to run Factory ammo with a standard CAR buffer and spring. 123 Amax touches lands at 2.325OAL
    Barrel is Black

    • Chamber: 6.5 Grendel (SAAMI)
    • Bolt: uses .135 -.136 recess Any SAAMI Grendel bolt
    • Profile:  Tapers-.800- .700/.750GB/.718
    • Fluted: No
    • Barrel Length: 16"
    • Twist Rate: 1:8- Hybrid 3R rifling
    • Gas System: mid  Length
    • Diameter at Gas Port: .750"
    • Muzle Thread Pitch: 5/8x24
    • Material: stainless
    • Finish: Melonite(black)
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 2lb -oz
    Reg. Price:
    $249.00
    Sale Price:
    $150.00
    Save:
    $99.00
    Items Remaining:out of stock

    Scroll down to get the  big 750XD bolt option. It is a stronger bolt not just a normal bolt with a funny monster logo etched on it. The bolt head is the same diameter as mil spec but the lugs have been redesigned to add more attachment strength to the thin rim around the face of the bolt. You can run this bolt to 60k psi without worry IF your brass can handle it.
    Barrels ported to run Factory ammo with a standard CAR buffer and spring. 123 Amax touches lands at 2.325OAL
    No coupons or discounts with this item. Shipping flat rate $20.    Barrel is Black

    • Chamber: 6.5 Grendel (SAAMI)
    • Bolt: uses .135 -.136 recess Any SAAMI Grendel bolt
    • Profile:  Tapers-.850- .750/.750GB/.718
    • Fluted: No
    • Barrel Length: 18"
    • Twist Rate: 1:8- Hybrid 5R rifling
    • Gas System: mid  Length
    • Diameter at Gas Port: .750"
    • Muzle Thread Pitch: 5/8x24
    • Material: 416R stainless
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 2lb -3oz
    Reg. Price:
    $249.00
    Sale Price:
    $150.00
    Save:
    $99.00
    Items Remaining:4

     special offer, No discounts or coupons- $20 flat rate shipping

    The big 750XD bolt is an option with the 6.5 Grendel barrels.
    Barrels ported to run Factory ammo with a standard CAR buffer and spring. 123 Amax touches lands at 2.325OAL

    Barrel is Black

    • Chamber: 6.5 Grendel (SAAMI)
    • Bolt: uses .135 -.136 recess Any SAAMI Grendel bolt
    • Profile:  Tapers-.850- .750/.750GB/.718
    • Fluted: No
    • Barrel Length: 18"
    • Twist Rate: 1:8- Hybrid 3R rifling
    • Gas System: mid  Length
    • Diameter at Gas Port: .750"
    • Muzle Thread Pitch: 5/8x24
    • Material: stainless
    • Finish: melonite
    • Process: Button Rifled
    • Barrel Lining: melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 2lb -3oz
    Reg. Price:
    $259.00
    Sale Price:
    $210.00
    Save:
    $49.00
    Items Remaining:out of stock

    Due late May. Special offer
    20" med  contour with a rifle length gas system . Barrels ported to run factory ammo with a standard CAR buffer and spring.

    Big 750XD bolt is an option below.

    • Chamber: 6.5 Grendel (SAAMI)
    • Bolt: uses .135 -.136 recess SAAMI
    • Profile:  midweight -.850/.750/.718
    • Fluted: No
    • Barrel Length: 20"
    • Twist Rate: 1:8- Hybrid 3R rifling
    • Gas System: RIFLE Length
    • Diameter at Gas Port: .750"
    • Muzle Thread Pitch: 5/8x24
    • Material: stainless
    • Finish: stainless
    • Process: Button Rifled
    • Barrel Lining: none
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 2lb 11oz

    Reg. Price:
    $249.00
    Sale Price:
    $150.00
    Save:
    $99.00
    Items Remaining:out of stock

    This is a one time special offer-

    Wildcat based on a shortened 5.56/223 case. The brass must be cut down and resized and loaded but there is factory ammo available.     https://www.jbsfirearms.com/category-s/1831.htm   Uses a mil spec 5.56 bolt and mags so the only thing needed to convert the 5.56 is the barrel and ammo.  The 1:11.25 twist rate will accurately shoot any bullet from 80-120gr and most 130s.

    If it isn't stamped "ARP" it is not an AR Performance barrel.
    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    • Chamber: 277 Wolverine/6.8x39
    • Profile: SCOUT lightweight-  2017  Barrel tapers .746-.696 under the guard/.750 GB /.700 GB forward
    • Fluted: No
    • Barrel Length: 16"
    • Twist Rate: 1:11.25- Hybrid 5R rifling
    • Gas System: mid Length
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8x24
    • Material: 4150 Chrome Moly Vanadium Steel
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 1lb 13.6oz

    Bullfrog Rusthunter products are known to cause discoloration of Melonite surfaces.

    Reg. Price: 
    $449.00
    On Sale: 
    Add this item to your cart to see the sale price!
    Items Remaining:out of stock

    Due fall 2018

    The 27ARP is a AR15 wildcat that will push 130gr bullets to 2700-2750fps, apx 200fps faster than the 6.8.   It is close to a full power hunting cartridge, 308 level.
      Barrels ported to run with a standard CAR buffer and spring. Includes the new 750XD bolt(.742" nominal dia), matching extension and shipping.

    • Chamber: 27ARP -.277cal  wildcat .
    • Profile:  -.850/.750/.700
    • Fluted: Yes
    • Barrel Length: 20"
    • Twist Rate: 1:10- Hybrid 3R rifling
    • Gas System: RIFLE Length
    • Diameter at Gas Port: .750"
    • Muzle Thread Pitch: 5/8x24
    • Material: 4150 Chrome Moly Vanadium Steel
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4-750XD bolt
    • Assembly: Stripped
    • Weight: 2lb 7oz

    Reg. Price:
    $299.00
    Sale Price:
    $249.00
    Save:
    $50.00
    Items Remaining:out of stock

    Out of stock until  Oct

    Part of our Predator line of barrels, this cartridge is based on the PPC or Grendel brass. This is the same as the  "6mmAR" or "243LBC".  Whatever it is called it is capable of pushing 95gr bullets with a BC of .456 to 2800fps out of a 20" barrel and 105s to apx 2775fps making it one of if not the flattest shooting long range cartridges to fit in an AR15. Exterior ballistics beat the Grendel. It may also be the most versatile cartridge we have ever produced. It is capable of shooting super light bullets at small varmints, 75gr bullets at yotes, 95-108gr long range target bullets and 80-90gr hunting bullets at deer and hogs.   Hornady custom dies are available.  Grendel bushing dies with a .268 bushing  and a 6mm expander ball may also be used to load.  Hornady brass tends to work better. Try 27.5-28gr  8208 witha a 95smk set to 2.29 OAL Customer photo of group shown. These 22" 3R barrels are as fast as many of the old 6 groove 24" barrels.  Sorry the 750XD bolt is not an option with the 224 or 6mm.

    Barrel extension must be installed after the flutes are cut. The flutes will NOT be clocked straight up.

    • Chamber: 6mm Predator
    • Bolt: .136 recess-
    • Profile:  SPR-.850/.750/.718
    • Fluted: YES- 8 straight flutes
    • Barrel Length: 22"
    • Twist Rate: 1:8- Hybrid 3R rifling
    • Gas System: RIFLE Length
    • Diameter at Gas Port: .750"
    • Muzle Thread Pitch: 5/8x24
    • Material: 4150 Chrome Moly Vanadium Steel
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 2lb 12oz
    Reg. Price:
    $249.00
    Sale Price:
    $175.00
    Save:
    $74.00
    Items Remaining:out of stock

    Out of stock untilOct.

    Sorry no new customers with this item. Every barrel will require a direct signature. No shipping to Apartment complexes.

    16" 7.62x39 barrel with a mid gas system. We were the first to offer a mid gas 7.62x39.

    Melonite treated 4150 CMV.

    5/8-24 muzzle threads.

    Any 7.62x39 bolt will work, Grendel bolts will NOT work.

    Wolf or Tula ammo shoots around 3/4-1" with a decent scope and trigger.

    Reg. Price: 
    $299.00
    On Sale: 
    Add this item to your cart to see the sale price!
    Items Remaining:out of stock

    Out of stock until Oct.

    Marked down below cost- no coupons or discounts

    If you want a 6.5mm but are concerned about bolt life and feeding the SIX5 is an option.
      This is a 6.5mm wildcat based on the 6.8 SPC case that uses stronger bolts and feeds better from the 6.8 mags. These barrels can be very accurate(1/2MOA) with 100gr TTSX, 120gr TSX, 100 Amax, 120 Nosler, 100 Nosler Patition, 95 Vmax.  The 100gr bullets at 2800fps are a sweet spot for a case the size of the Grendel or 6.8. They will out perform any of the 123gr bullets out of the  Grendels 2500fps all the way to 800yds.  These 16" barrels are perfect for those that love the Barnes 100gr TTSX bullets and want a shorter barrel to hunt with.

    Please read the load data below carefully before purchasing , it takes loading long(OAL), max mag length to get the best accuracy. If you do not understand what it takes to get accuracy from this round please call before purchasing. Mags that allow loading longer than 2.3"  are available from Cavity Back Bullets.

     By trimming the 6.8 case back to 1.610-1.615  the Hornady 123 Amax and SST, Barnes 100 and 120 TTSX, 120 TSX. Nosler 100 and 120 NBT can be loaded to the cannelure in a 41mm long 6.8 case to 2.31"and fit in unmodified Magpul SIX8 pmags or PRI 6.8 mags. 

    4150 CMV 11595E barrel steel. Barrels have a Hybrid 5R rifling with 1 in  8.5 twist .
      Barrels have M4 feed ramps, mid length gas system, .800 under the guard, .750 gas block dia. .718 dia from gas block to muzzle.  5/8-24 thread muzzle. Barrels have helical flutes ($120 option in many places)

    6.8 bushing dies with a .284-.288 bushing and trimming the case to 1.610" is needed to reload. The chamber has a .297 neck 1.5 degree throat angle for better accuracy and to prevent splitting the case necks from over working the brass. Do NOT have to fire-form just size trim and load.

    This is a barrel only, it does NOT include any other parts unless added below as an option. 

    .
    Bullfrog Rusthunter is known to cause discoloration of Melonite surfaces.
    NOTE: When forming the brass the first time it must be done correctly to get good accuracy. When setting the shoulder location it is best to set the dies .002-.004" under the chamber size.

     


    All loads below should be considered max. Start 1-2gr lower and workup while looking for accuracy.
    Pressures shown are from actual pressure tests not calculated from quickload.

    The 123 SST and Amax must be loaded to 2.31+ to get the best accuracy. The 120 Nosler 2.3"seems to work well.

    Try these loads-they have been tested for accuracy using Hornady brass, Wolf magnum primers and all shoot under 1 MOA some under 1/2 MOA out of the 16" barrels.
    100gr Barnes TTSX -OAL 2.3-2.31" 28.5gr 10x ---max load, do not use more than 28.5 10x--.4 MOA --most accurate load tested.
    100gr Hornady Amax -OAL 2.295-2.31 28gr 10x ---max load
    120gr Barnes TSX--OAL 2.32-30gr AA2520---max load
    120 Nosler BT-OAL 2.3-2.31"-30gr AA2520---max load
    123gr Amax OAL 2.31-2.32-30gr AA2520---max load
    Drop 1/2-1 gr if using CCI magnum primers or Federal brass. All of those loads above are compressed but shoot very well.
     

    123 Amax 2.310" OAL SSA brass, CCI450 primer
    8208-28.5gr=2401fps>56400psi
    2520-30gr=2456fps>57800psi
    2200-26gr=2410fps>58200psi
    N530-27.5gr=2475fps>57500psi
    CFE-32gr=2493fps>54500psi---max fill
    Xterm-29.5gr 2508fps>59422psi


    100gr Amax-best at 2.295 OAL drop at least 1 gr from max
    N530-29.5gr=2788fps>59700psi---29 max>27gr apx 1"
    8208-29.8gr=2684fps>56669psi--max fill> 28gr apx 1"
    N200-27.5gr=2738fps>59460psi max
    RE7-26.5gr=2705fps>58200psi
    2200-28gr=2720fps>59730psi max
    10X-28gr=2763fps>57500psi
    H335-31gr=2747fps>56100psi
    CFE-33gr=2697fps>52000psi--max fill
    X-term 31.5gr 2775>56388psi>28gr apx 1"

    Reg. Price:
    $349.00
    Sale Price:
    $249.00
    Save:
    $100.00
    Items Remaining:out of stock

    Out of stock until Oct.

    Think of this as the 224 Valkyrie improved - Wildcat based on the 6.8 brass, apx 250fps faster than a 5.56 and 150 fps faster than the Valkyrie.  75-80gr bullets run 3000-3100 out of a 20" barrel. The 5.56x42 was designed around 2007 or 2008 long before the 22 Nosler or 224 Valkyrie. It was designed to shoot the 80gr Amax and Berger at mag length but also shoots varmint bullets as light as 40gr.

    6.8 bushing dies can be used to form and load the 5.56x42 or Whidden Gunworks in Ga can make a custom set for you. 224 Valkyrie dies can be used for the initialforming if the die is held upoff the shell holder and adjusted so the neck is sized down without touching the shoulder.

    NOTICE- This barrel has 5/8-24 muzzle threads to reduce bore swelling at the muzzle common with barrels threaded 1/2-28. Most barrels with 1/2" muzzle threads will allow bullets to wobble when exiting the muzzle which degrades accuracy.

    Jason Peterson shot a 4.5" group at 1000 yards using 28gr N540 with the 80gr Amax.

    Barrel extension must be installed after the flutes are cut. The flutes will NOT be clocked straight up.

    • Chamber: 5.56x42(6.8 based wildcat)
    • Profile: SPR midweight-.850/.750/.718
    • Fluted: 8 straight flutes
    • Barrel Length: 20"
    • Twist Rate: 1:7.7- Hybrid 3R rifling
    • Gas System: rifle Length
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8-24
    • Material: 4150 Chrome Moly Vanadium Steel
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 2lb 12oz

      This business supports AMERICA and its Constitution

      (ARP) AR15 Performance LLC

      Key West, FL 33040

      Hi performance 5.56 & 6.8 SPC barrels and parts since 2007

      The best way to contact is by email
      Email:  tech@AR15performance.com

      Phone: 801-750-4216  8am-5pm eastern time  M- Fri only
      Sorry we do not export anything and do not have a storefront. Everything must be purchased online.

      We're in business for the 50% of this country that are tired of the corrupt democratic way, the Deplorables, Patriots, Infidels, protectors of the US Constitution, flag and President. We applaud the 50% who refused to let Hillary destroy this country. 

      6.8 SPC II, 5.56, 223 wylde, 6.5 Grendel, 224 Valkyrie, 240 Valkyrie,   270-08, 30 Herrett, TAC 6, 224 Predator,
        6mm Predator, 277 WLV,  224 Grendel, 6mm Grendel, 6.5 Creedmoor, 5.56 x 42,
      AR Performance