|Items Remaining:||out of stock|
NiB coated BOLT BODY ONLY- NO extractor, NO ejector, no springs or pins or rings.
These bolts are designed to use the stronger 5.56 extractors NOT 6.8 extractors.
Our bolts are not just a normal AR15 bolt design made from 9310 like most of the others on the market. We have taken the current AR15 bolt to the next level by redesigning the lug and cam pin area as well using a stronger 9310 Vac-ARC alloy to make this the most durable mil spec compatable bolt on the market. Notice the thicker web between the recess and the lugs and the larger radius at the root of the lugs.
3 year conditional warranty
The complete firearm upper half and cartridge fired must be sent in for inspection. Receivers that are unsquare will cause the bolt to carry the load unevenly on the lugs which will cause early failure. Square the receiver face or use Mega brand receivers. Overgassed systems will also cause early failure. Adjust the gas to eject the cases at 3-4 O'clock. Bolt face and firing pin hole erosion due to gases leaking around the primer or primer piercing voids the warranty. Bolts should be replaced around 5000 rounds.
Do not use Remington 6 1/2, CCI 400, Fed 205 primers.
CURRENT SHIPPING TIMES 6-9 BUSINESS DAYS
This business supports AMERICA and its Constitution
We're in business for the Deplorables, Patriots, Infidels, protectors of the US Constitution, flag and President.
We applaud the 50% who refused to let the democratic terrorist destroy this country.
(ARP) AR15 Performance LLC
Key West, FL 33040
Hi performance 5.56 & 6.8 SPC barrels and parts since 2007
The best way to contact is by email
Phone: 801-750-4216 8am-5pm eastern time M- Fri only
Sorry we do not export anything and do not have a storefront. Everything must be purchased online.
6.8 SPC II, 5.56, 223 wylde, 224 Valkyrie, 270-08, 30 Herrett, TAC 6,
224 Predator, 6mm Predator, 224 Grendel, 6mm ARC